What specific technical and operational information must a new bottled water plant prepare before requesting a quotation from a water treatment and filling equipment supplier?

Direct Answer

To receive an accurate and viable quotation for a custom bottled water production line, you must provide source water analysis reports, target product standards, hourly production capacity, and facility layout constraints. Without these specifics, suppliers can only provide generic estimates that often fail to address critical issues like mineral retention or peak flow stability.

1. Source Water Quality Report (Critical)

Your equipment design depends entirely on the raw water characteristics. You must provide a recent laboratory analysis of your local water source (tap, well, or river). Key parameters include:

• TDS & Hardness: Determines if Reverse Osmosis (RO) is needed for purified water or if Nanofiltration (NF) is better for retaining minerals in spring water.
• Contaminants: Levels of iron, manganese, bacteria, and organics dictate pre-treatment needs (e.g., activated carbon, softeners).

2. Target Product Standards & Capacity

Define exactly what you are producing and how fast. Ambiguity here leads to mismatched machinery.

• Product Type: Specify if it is Purified Water (requires dual-stage RO + UV/Ozone) or Spring/Natural Water (requires NF + UF to preserve minerals).
• Production Rate: State the required output in bottles per hour (e.g., 200–1,800 bph for 18.9L barrels), not just total daily volume. This determines the size of the washing-filling-capping unit.
• Bottle Specifications: Provide dimensions for all bottle sizes (e.g., 5L, 11.3L, 18.9L) and whether they are PET bottles or reusable PC barrels.

3. Facility Layout & Utility Constraints

The engineering team needs to know where the equipment will fit and what utilities are available.

• Floor Plan: A CAD drawing or detailed sketch showing the available space, door heights, and column positions.
• Cleanroom Requirements: If you require ISO Class 8 (100,000) or higher, specify this early so we can integrate clean air purification systems into the quote.
• Utilities: Confirm available power voltage (e.g., 380V/50Hz), steam availability, and drainage points.

4. Service Scope Expectations

Clarify if you need a complete turnkey solution (design, manufacturing, installation, commissioning, training) or just the equipment supply. Our standard offering includes end-to-end engineering services tailored to your site-specific constraints.

Next Steps

Once you have gathered the above data, please submit it via our bottled water production line quotation channel. Our engineering team will perform a material balance calculation to ensure the proposed system handles peak loads, CIP cleaning, and buffer storage correctly, guaranteeing long-term operational stability.