Bottled Spring Water Filling Production Line
Chuxin Mingwei’s customized bottled spring water filling production line is specifically engineered for the natural characteristics of spring water—covering raw water purification, empty bottle handling, precise filling, and cap sealing inspection. Compatible with mainstream bottle sizes including 18.9 L, 11.3 L, and 5 L, it delivers scalable output from 200 to 1,800 bottles/hour while preserving essential minerals and ensuring full compliance with food safety regulations.
Highlights
- Dual-membrane NF + UF process balances purification efficiency with mineral retention
- Integrated bottle washing-filling-capping unit: filling accuracy ≤ ±2 mL; capping pass rate ≥99.6%
- PLC-based intelligent control system supporting parameter memory, fault warning, and data traceability
- Full stainless-steel food-grade construction compliant with GB 4806.9-2016
- 16 years of water treatment engineering experience—end-to-end delivery from concept design to after-sales maintenance
Specifications
- Compatible Bottle Sizes
- 18.9 L, 11.3 L, 5 L, and other standard drinking water bottles
- Rated Output Capacity
- 200–1,800 bottles/hour (based on 18.9 L bottles)
- Core Purification Process
- Nanofiltration (NF) + Ultrafiltration (UF) + Ozone + UV
- Material Standard
- SUS304/SUS316 food-grade stainless steel, compliant with GB 4806.9-2016
- Control System
- PLC automatic control + 7-inch touchscreen HMI
- Service Response
- Onsite response within 48 hours in Huizhou; technical support within 72 hours nationwide
Stable, Spring-Water-Specific Filling Solution
Chuxin Mingwei’s bottled spring water filling production line leverages localized manufacturing expertise in Huizhou and is purpose-built to address key features of spring water—low turbidity, naturally occurring minerals, and variable microbial levels. Its integrated process system combines ‘quality-preserving purification + precision filling + intelligent control’. The entire line strictly complies with GB 19298-2014 ‘Packaged Drinking Water’ and GB 4806.9-2016 ‘Food Contact Materials’ standards. From source water adaptation and equipment selection to factory layout implementation, design and delivery are led by a technical team with 16 years of water treatment engineering experience.
Core Process Modules
- Spring-Water-Optimized Purification Unit: Combines nanofiltration (NF) and ultrafiltration (UF) membranes to efficiently remove bacteria, colloids, and organic contaminants while selectively retaining beneficial minerals such as calcium, magnesium, and potassium. Integrated dual disinfection—ozone generator and UV sterilization—ensures consistent microbial compliance.
- Automatic Bottle Washing-Filling-Capping Unit: Integrates high-pressure spray, rotary brush cleaning, and internal steam rinsing for thorough empty-bottle sanitation; filling accuracy ≤ ±2 mL; optional capping modes (screw-on or press-on) achieve ≥99.6% capping success rate; compatible with mainstream drinking bottle materials including PC and PETG.
- Intelligent Control & Monitoring System: Built on PLC + HMI interface, displaying real-time critical parameters—including turbidity, residual ozone, fill volume, and equipment status. Supports data logging, self-diagnosis of faults, and basic remote operational alerts—reducing dependency on dedicated technical staff.
- Food-Grade Structural Design: All water-contact components use SUS304 or SUS316 stainless steel with polished welds, zero dead-legs, and easy-clean geometry. The entire unit meets ISO 22000 food safety management system requirements for hygienic equipment design.
Flexible Adaptability
This production line supports non-standard customization: Equipment layout, piping routing, and electrical configuration can be optimized based on customer-specific inputs—including raw water quality reports (TDS, hardness, iron/manganese content), facility dimensions (ceiling height, span, floor load capacity), target output (200–1,800 bottles/hour), and bottle specifications (e.g., 18.9 L standard, 11.3 L household, or 5 L portable). It accommodates new plant construction, legacy line upgrades, and space-constrained mountainous sites.
End-to-End Service Support
- Free raw water quality analysis and output capacity matching assessment;
- Assistance preparing equipment compliance documentation required for SC production license application;
- Inclusive services: on-site equipment installation & commissioning, operator training, and supervised trial production for first batch;
- After-sales response: Huizhou-based team onsite within 48 hours; nationwide technical support within 72 hours;
- Optional value-added services: cleanroom construction, downstream equipment (light inspection, bagging, palletizing), and online water quality monitoring terminals.